Configuring IGRP
Routers Used: 2621 w/ CISCO2600-MB-2FE and WIC-2T modules IOS: c2600-i-mz.121-5.T9 Objective In this lab, configure IGRP for unequal cost load balancing and tune IGRP timers to improve performance. Scenario International Travel Agency (ITA) has asked for IGRP to be implemented in its WAN. Step 1 Build and configure the network according to the diagram. If the configuration files are used from the previous lab, remove all routing protocols. Note : PC1 and PC2 are not required to complete this lab, but they might be used in testing or as Telnet clients. If used, the PC1 gateway may be either Dion1 router or the Dion2 router. On all three routers, configure IGRP for Autonomous System 24, and enable updates on all active interfaces with the network command. Arief(config)#router igrp 24 Arief(config)#network 192.168.1.0 Arief(config)#network 192.168.2.0 Arief(config)#network 192.168.3.0 Dion1(config)#router igrp 24 Dion1(config)#network 192.168.1.0 Dion1(config)#network 10.0.0.0 Dion2(con...