Configuring OSPF
Routers Used : 3640 w/ NM-1FE-TX IOS : c3640-jk9s-mz.124-16a Objective In this lab, OSPF will be configured on three Cisco routers. First, configure loopback interfaces to provide stable OSPF Router IDs. Then configure the OSPF process and enable OSPF on the appropriate interfaces. After OSPF is enabled, tune the update timers and configure authentication. Scenario The backbone of International Travel Agency’s (ITA) WAN, located in Jakarta, consists of three routers connected using an Ethernet core. Configure these core routers as members of OSPF Area 0. Because the core routers are connected to the Internet, it is decided to implement security, preventing unauthorized routers from joining Area 0. Also, within the core, the network failures need to be realized quickly. Step 1 Build and configure the network according to the diagram, but do not configure OSPF yet. A switch or hub is required to connect the three routers through Ethernet. Use ping to verify the work and test connectivity...